Pixel Scaling Calculator
Get a real size from an image. With a reference in shot, a 1.8 m person 60 px tall makes a 900 px building 27 m (89 ft) tall. Without one, angsizing turns the object's share of the frame into a size at 60° to 70° field of view. Then use the size in the calculator.
1. Your image (optional)
Open, paste or drop a panel or frame, then click both ends of the reference and of the target. Your image stays on your device: nothing is uploaded. You can also skip this and type the pixel lengths below.
2. Pixel scaling
Something of known size next to the target, at the same distance from the viewer (a person, a car, a door).
- Scale: 1.8 m ÷ 60.0 px = 0.030 m per pixel
- Target: 900 px × 0.030 m/px = 27.0 m
- Valid only if both are at about the same distance from the viewer and seen side-on.
3. Angsizing
No reference in shot? Use the object's share of the frame and one known value: its distance or its size.
- At 70° field of view: angle = 2 × atan(tan(70° ÷ 2) × 200 px ÷ 1,080 px) = 14.776°
- Size = 2 × 1,000 m × tan(14.776° ÷ 2) = 259 m
- At 60° field of view: angle = 2 × atan(tan(60° ÷ 2) × 200 px ÷ 1,080 px) = 12.205°
- Size = 2 × 1,000 m × tan(12.205° ÷ 2) = 214 m
- Angles in degrees (a calculator left in radians gives nonsense). Frame measured along its height, matching the 70° vertical convention.
Getting a fair measurement
- Pick a reference at the same depth as the target. A person in the foreground makes a distant mountain look tiny.
- Measure the full height or width, edge to edge, on the largest, sharpest version of the image you can find.
- Don't use tiny background objects as references: a few pixels of error becomes a huge error in the result.
- For angsizing, measure the frame's full height in pixels and keep angles in degrees.
- Say which method and field of view you used when you post the result, and copy the working with it.
Questions
What is pixel scaling?
Pixel scaling finds a size by comparing two things in the same image. If a 1.8 m person is 60 pixels tall and a building beside them is 900 pixels tall, the building is 900 ÷ 60 × 1.8 = 27 m. It only works when both are about the same distance from the viewer.
What is angsizing?
Angsizing uses how much of the frame an object fills. With an assumed field of view (70° by convention, 60° often argued), the object's pixel height gives its angle, and the angle plus a known distance gives its size (or a known size gives its distance).
Why does the result show two numbers?
A drawing has no real camera, so its field of view is a convention, not a measurement. We show the result at both 60° and 70° so you can see how much the choice matters.
Is my image uploaded?
No. The image is opened in your browser and measured there. It is never sent to Powerscaled or anyone else.